About TP-Link AC1750 Quick Installation Guide
TP-Link AC1750 Quick Installation Guide Free Download PDF. Quick Instruction about how to install the router step by step.
Connect the hardware:
- If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL/Cable/Satellite modem, connect the Ethernet cable to the router’s Internet port, and then follow Step1, 5 and 6 to complete the hardware connection
WPS/Wi-Fi Button WPS:
Press the button for 1 second, and immediately press the WPS button on your client to start the WPS process.
Press and hold the button for more than 2 seconds, then release the button to turn on or off the wireless function of your router.
Press and hold the button for about 6 seconds until the Power LED blinks to reset the router to its factory default settings.
|TP-Link AC-1750||Quick Installation Guide|
|Model||AC1750, Archer A7, Archer C7|
|File sizes||469 KB|
|File pages||2 pages|
Download TP-Link AC1750 Quick Installation Guide
Q1. What should I do if I cannot access the web management page?
If the computer is set to a static IP address, change its settings to obtain an IP address automatically. Verify that http://tplinkwifi.net is correctly entered in the web browser. Alternatively, enter http://192.168.0.1 or http://192.168.1.1 in the web browser and press Enter. Use another web browser and try again. Reboot your router and try again. Disable and enable the network adapter being used.
Q2. What should I do if I cannot access the internet?
Check if the internet is working normally by connecting a computer directly to the modem using an Ethernet cable. If it is not, contact your internet service provider. Log in to the web management page of the router, and go to the Basic > Network Map page to check whether the internet IP address is valid or not. If it is, please run the Quick Setup again; otherwise, check the hardware connection. Reboot your router and try again. For cable modem users, log in to the web management page of the router. Go to Advanced > Network > Internet > MAC Clone, click Use Current Computer MAC Address and click Save. Then reboot both the modem and the router.
Q3. How do I restore the router to its factory default settings?
With the router powered on, use a pin to press and hold the Reset button on the back until the Power LED blinks. Log in to the web management page of the router, go to Advanced > System Tools > Backup & Restore, and click Factory Restore. The router will restore and reboot automatically.
Q4. What should I do if I forget my web management page password?
If you are using a TP-Link ID to log in, click Forgot password on the login page and then follow the instructions to reset it. Alternatively, press and hold the Reset button on the back of the router until the Power LED blinks to reset it, then visit http://tplinkwifi.net to create a new login password.
Q5. What should I do if I forget my wireless network password?
If you have not changed the default wireless password, it can be found on the label at the bottom of the router. Connect a computer directly to the router using an Ethernet cable. Log in to the router’s web management page at http://tplinkwifi.net, and go to Basic > Wireless to retrieve or reset your wireless password.
After installation complete you can learn more about the router on TP-Link AC1750 Archer A7 User Manual